| |
|
|
| Panasonic Projector Lamps Article Of The Month |
LCD v DLP projectors
Kenny Hemphill
If you’ve been thinking about buying a home theater projector and read reviews or done a little bit of research, you’ll be aware that there are two technologies competing for the contents of your wallet.
Digital Light Processing (DLP) is a technology developed by Texas Instruments and it works by projecting light from the projector’s lamp onto a DLP chip, made up of thousands of tiny mirrors. Each mirror represents a single pixel and directs the light projected onto it either into the lens path to turn the pixel on or away from it to turn it off. Most DLP projectors have only one chip, so in order to reproduce color, a color wheel consisting of red, green, blue and sometimes, white filters is used. The wheel spins between the lamp and the chip and changes the color of the light hitting the chip from red, to green, blue. Each mirror on the DLP chip tilts towards or away from the lens path depending on how much of a particular colour light is required for that pixel at any given instant.
LCD projectors have three separate LCD panels, one for red, one for green, and one for blue components of the image being processed by the projector. As light passess through the LCD panels, individual pixels (or picture elements) can be either opened or closed to either allow light to pass through or be filtered out. In this way the light is modulated and an image projected on to the screen.
Technology in both LCD and DLP projectors is improving all the time. However, at the time of writing DLP still has a slight edge in the home theater market.
LCD projectors have historically had three main advantages over DLP. They produce more accurate colors (due to the three separate LCD panels), they produce a slightly sharper image (although this is as good as undetectable when watching movies) and they are more light-efficient, which means they produce brighter images using less power.
LCD
However, the advent of higher resoltion LCD projectors (particularly ‘HD-ready’ projectors which have a horizontal resolution of 768 pixels or greater) means that pixelation is less of a problem than it used to be. And the improved ability of LCDs to produce high-contrast images is also allowing them to be taken more seriously by home theater enthusiasts.
DLP
However, LCD projectors also have some disadvantages, although as the technology improves these are becoming less and less relevant. The first of these is pixelation, or what’s known as the screen door effect. This means that sometimes you can see the individual pixels and it looks as though you are viewing the image through a ‘screendoor.’ The second historic disadvantage of LCD v DLP is that LCD doesn’t produce absolute black, which means that contrast is less than you would get with DLP.
The key advantages DLP has in the LCD v DLP debate is that DLP projectors tend to be smaller and lighter, have better contrast, and don’t suffer the same pixelation problems as LCD projectors. There is one problem that some users report with DLP projectors, although it appears to only affect a very small number of people. Because of the way DLP works, at any given instant, the image on screen is either red, green, or blue. However, the images change so quickly, that the human eye doesn’t detect this and your brain puts the red, green and blue images together to make a complete frame of video. Unfortunately, some people can see the individual colours, and others can detect them enough to cause eye-strain and headaches. However, technology has improved significantly with the introduction of six-color wheels and faster rotation speeds. The rainbow effect should be a problem for even fewer people. The best way to find out if you’re affected is to try out a DLP projector, perhaps by hiring one, before you buy.
Both LCD and DLP are used in projectors suitable for home theaters, but they work in quite different ways and produce slightly different results. If you ask around – particularly in electronics stores, you’re likely to be provided with a mass of information that’s confusing and often just plain wrong. So here, in an effort to clear the fog surrounding projectors, is our guide to LCD v DLP.
Kenny Hemphill is the editor and publisher of The HDTV Tuner
|
| Panasonic Projector Lamps Product Of The Month |
|
| Latest Panasonic Projector Lamps News |
Sharp HD-Ready XV-Z3000 Projector (BIOS)
UK - Sharp Electronics (UK) Ltd has today introduced the HD Ready XV-Z3000 into its growing home cinema projector range. This high-performance DLP front projector offers a resolution of 1,280 x 768, and instantly transforms any room into a high-tech home theatre...
Delta expects revenues to increase 24% this year (Digi Times)
During the celebration of its 35th anniversary on April 25, Delta Electronics said its consolidated revenues for 2006 should surpass NT$100 billion (US$3.11 billion), up 24% from 80.83 billion (US$2.52 billion) in 2005. The Taiwan-based company also provided some details about its roadmap in the display and solar power sectors.
Behind the lens: Video-look perfect for Project (The Burlington Free Press)
Since part of Jamie Masefields performance was video, I wanted to re-create a mini version of the space he would be playing in at the Flynn and show people a little of what the show might actually look like.
Epson starts volume production of D5 HTPS panels for data projectors (Digi Times)
Seiko Epson on May 10 announced that it has begun volume production of high-temperature polysilicon (HTPS) liquid crystal panels for its 3LCD data front projectors. Featuring D5 technology, the 0.8-inch panels produces XGA (1024×768) resolution.
|
|
|
